How to Clean Bathroom Faucets? Try out These Tips

Everyone wants shiny and clean bathroom faucets, but unfortunately, hard water, calcium deposits, soap and oil deposits kill the beauty of the faucet. Cleaning with soap and water can cause water spots which will result in a dull finish, but it is possible to remove these stains and make your bathroom faucets look new again.  Let’s learn about how to clean bathroom faucets.

Bathroom faucet

Best Way to Clean Faucets

Here are a few tricks on how to maximise the sparkle of your faucets, how to clean bathroom faucets, how to clean faucets as well as clean the various metal finishes and fixtures.

01. Basic Cleaning Method

Basic Cleaning Method

You do not always need expensive things to keep the house clean. First, you will have to try the basic method of how to clean bathroom faucets.

A mixture of dish soap and water can take care of the cleaning needs for most faucets types. Then wipe the faucets with a dry cloth. This helps to prevent spotting on the faucets finish. Go to the next step, only when this fails.

If the grime, hard water deposits, oil and grease on the faucet and its joints become a challenge, here are some intense cleaning tips that are worth trying. Your faucet can be made of Chrome, brass, bronze, stainless steel, aluminium or Pewter, but we have ways to clean your faucet and we are sure, you will be surprised by the outcome.

02. Intense Cleaning

Intense Bathroom faucet cleaning

The word ‘intense cleaning’ may give an impression that we are going to speak of some difficult mixtures of unheard chemicals. However, the bright side of this intense cleaning is that you can keep your faucets clean and sparkling by using things available on your kitchen racks.

Lemons, Vinegar, flour, soap, baking soda, salt etc. and you are ready to go!

  • If you have used water or dish soap and failed, then in that case, the next method is to use the vinegar. It is the best way to clean faucets. Homemade paste for polishing brass/ bronze is made out of vinegar, salt and all-purpose flour. Mix equal parts of these three ingredients and apply on the faucets. Then scrub the surface and wipe the faucets with a dry cloth.
  • For a brass bathroom faucet, make a paste of equal amounts of baking soda and lemon juice. Dip a toothbrush in the mix and gently scrub the surface. When it comes to stainless steel and copper finishes, the citric acid in ketchup will help to remove the tarnish on bathroom faucets and shine without much effort. Apply ketchup on the surface and let it sit for a few moments and then rinse off with a damp cloth.
  • Bathroom tap cleaning for chrome finish is a bit different. Spray vinegar on the chrome finish and let it sit for a few moments. Then wipe the faucets with a dry cloth. You can even dip tissues or cloth pieces in vinegar and wrap the faucet with it.
  • You can use toothpaste to clean the chrome finish of the faucets. Apply a light layer of non-gel toothpaste on the faucets and keep it for a few minutes. Then clean the faucets with a cloth.
  • For brushed/polished nickel faucet, add mild soap into a bowl of warm water. Take a brush and scrub the solution over the faucet gently. Leave it for some time and buff it dry with a cloth. Never use vinegar on brushed nickel faucet as it can damage the surface.
  • On a Pewter faucet, first clean the surface with mild soap water and then apply a mixture of salt, flour and white vinegar (equal portions). Leave it there for a while and then, rinse it clean.
  • Lime juice works like magic on aluminium faucets. Try it out!
  • Plastic faucets are the easiest to clean. Take a brush and rub soap solution on the faucet. Rub it gently and your clean plastic faucet is ready for use after it is patted dry.

03. Clean Around the Edges

Clean around the edges

An old toothbrush is used to clean around the edges where the sink and the faucet meet. Dish soap and water is used to clean the edges. Wipe the faucets dry with a cleaning cloth.

04. Cleaning Showerhead

Cleaning Showerhead

If you want to know how to clean shower knob, here it is. To clean showerhead of either chrome, stainless steel, or other protected metal surfaces, fill a plastic bag with white vinegar. Attach the bag over the showerhead with a rubber band. Put it on for one hour, then remove the bag of vinegar and turn on the shower to flush away the vinegar and sediment. Polish with a soft cloth.


Many companies offer warranty on newer faucets that have been installed. But these warranties may be voided by using caustic cleaners or other corrosive cleaners on the faucets. So don’t try that if you want to use the manufacturer’s warranties. Hence, the above ideas are good enough to clean bathroom faucets.


If this article is interesting, roll up your sleeves and try the tips mentioned here for how to clean bathroom faucets. After all a clean, sparkling faucet can save you from frowning guests and leave you smiling!

Before you take a leave, we have shared some bathroom cleaning tips and varied types of bathroom accessories to have a look at:

12 Cleaning Tips to Make Your Bathroom a Cleaning Breeze!
6 Ways to Keep Your Bathroom Clean
Types of Bathroom Accessories

Do you have query?

Let our experts solve it for you while you rest

I need help to